You Recently Viewed...

Reflected Collimator for Light Guide

  • Reflected Collimator for Light Guide
  • Petri Dish Illumination
  • Microwell Plate Illumination
  • Working Distance 29cm



Delivering intense light inside of lab incubators and environmental chambers is a challenge. Prizmatix provides an elegant solution using Ultra High Power LEDs for Light guide and this special collimator/reflector/focuser combination.

Typically, incubator access ports are on the side near the top of a chamber. Light must be delivered downward to the target. Simply bending the liquid guide is not an option as the light uniformity degrades substantially when the light guide is not straight near the exit. This reflector bends the light, keeping the Light guide straight and the beam profile uniform. It also keeps the working distance as short as possible.

An optional focusing optics spreads the light to increase the area covered.

Note: Lab Stand is for illustration purposes only and not included.

Typical working distance using 5mm LLG and focuser:

Target Working distance WD from top of reflector
Standard Microwell Plate 29cm 35cm
Two Microwell Plates side by side 37cm 43cm
Four Microwell Plates 61cm 67cm
Large Petri Dish 29cm 35cm



Related Products

  • LLG-3/5- 3 or 5mm Liquid light guide 

  • UHP-F- Light guide coupled LEDs

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!