Sort by:

Modules and Accessories

Included in this category are all the components used to make complete Prizmatix LED systems such as LEDs, controllers, beam combiners and adapters. Additional accessories can make systems more versatile such as our beam switcher, filter wheel, or reference photodiode.

Products

  • Reflected Collimator for Light Guide
    $869.00 Choose Options Reflected Collimator for Light Guide
    Description Delivering intense light inside of lab incubators and environmental chambers is a challenge. Prizmatix provides an elegant solution using Ultra High Power LEDs for Light guide and this special...
  • UHPTLCC-02 LED Controller
    Prizmatix UHPTLCC-02 Benchtop Current Controller for UHP-T LEDs
    The Prizmatix UHPTLCC-02 Current Controller works with all Prizmatix UHP-T type LEDs. This controller is included in the UHP-T and UHP-T-EP LED Systems. It can be purchased individually here. Available in three...
  • Cuvette Holder Optiblock - Ideal for spectroscopy and similar applications
    $730.00 Cuvette Holder Optiblock - Ideal for spectroscopy and similar applications
    The Cuvette Holder Block is designed to hold a standard laboratory square cuvette inside of an optical system. Other components can be connected to any of the 4 sides with either Prizmatix Optiblock modules using locking...
  • Prizmatix Beam Combiner
    $984.00 Choose Options Prizmatix Beam Combiner
    The Beam Combiner is used to merge two or more Prizmatix LED outputs in a multi-wavelength LED Systems. A built-in dichroic mirror at a specific cut-off wavelength reflects the shorter wavelength and transmits the longer...
  • Microscope Adaptor
    $103.00 Choose Options Microscope Adaptor
    Adaptor to connect any Prizmatix Microscope LED light sources or Beam Combiner to the epi-fluorescence port of a microscope. Available for: Nikon Zeiss Olympus and Leica   Compatible...
  • $807.00 Choose Options Three Inch Collimator for Light Guide
    Description This special 3 inch collimator can be used to collimate light from a Liquid Light Guide.  For narrower beam diameter see our One inch and Two Inch collimators Related...
  • Two Inch Collimator & Focuser for Liquid Light Guide
    $595.00 Choose Options Two Inch Collimator & Focuser for Liquid Light Guide
    Description This special 2 inch collimator can be used to collimate light from a Liquid Light Guide. An optional focusing optic delivers a sharp uniform spot of light at a distance. The optional focusers are fixed focus...
  • Mic-LED heads
    $790.00 Choose Options Prizmatix High Power Microscope LED Head
    The Prizmatix High Power Microscope-LED Head is included in the High Power Microscope LED Light Source but can also be purchased individually here. It is available in a full range of wavelength, and includes your...
  • UHP-T White LED Head
    Prizmatix UHP-T White LED Head
    The UHP-T-W-DI LED head is included in the UHP-T-White LED system, but can also be purchased individually here. The Ultra-High Power UHP-T-DI series features a large 3x3mm single emitter LEDs and high...
  • CTRL-F 	Optional Dial for UHP-F
    $327.00 CTRL-F Optional Dial for UHP-F
    CTRL-F Optional control unit for UHP-F, UHP-FB and other LEDs with I2C interface.
  • $30.00 Power Adapter and Cord for BLCC-04
    P/N GST25A12-P1J - Available here and from quality electronics distributors such as Mouser and others.
  • $305.00 Choose Options One Inch Basic Collimator for Light Guide
    This 1 inch collimator can be used to collimate light from a Liquid Light Guide. A Collimator is used to keep the output of the light guide from diverging by expanding the beam and making it more parallel. To learn...
  • $145.00 Pair cables for UHP Mic-LED
    Extra Long cable set.  Temp Product.
  • $145.00 Pair cables for UHP-T- Mic-LED
    Set of cables. Includes one thick cable (power) and one thin cable (control) Use notes at check out to request extra long cables. ( 9 feet is recommended extra-long length. Maximum allowed is 12 feet)  Temp Product...
  • USB-TTL Interface
    $435.00 Prizmatix USB-TTL Interface
    Description The Prizmatix USB-TTL Interface is designed to enable a simple use of Prizmatix LED light sources with a computer through USB serial port. The USB-TTL Interface enables simple control of Prizmatix LED...
  • BLCC-04 Mic-LED Current controller
    $1,088.00 Choose Options Prizmatix Low Noise Benchtop Mic-LED Current-Controller
    The Prizmatix BLCC-04 Current Controller is used to power Prizmatix High Power Microscope LEDs (Mic-LED). This Product is included in the High Power Microscope LED Light Source but can also be purchased individually...
  • UHP-T-DI LED Head
    Prizmatix UHP-T-DI LED Head
    The UHP-T-DI LED head is included in each UHP-T-DI-LED system, but can also be purchased individually here. The Ultra-High Power UHP-T-DI series features a large 3x3mm single emitter LEDs and high current...
  • Liquid Light Guide XYZ adjustable Collimator
    $664.00 Choose Options Prizmatix Liquid Light Guide XYZ Collimator
      XYZ adjustable collimator for a Liquid Light Guide (LLG). This product includes an adaptor for the epi-illumination port of a fluorescence microscope of your choice. Compatible with Prizmatix Optiblock...
  • Prizmatix Liquid Light Guide
    $504.00 Choose Options Prizmatix Liquid Light Guide
    Description This flexible Liquid Light Guide is used to conduct light from a large LED emitter to the epi-fluorescence port of a microscope. This is useful when it is not practical to mount the LED directly on to the...
  • $320.00 Choose Options Prizmatix Liquid Light Guide Adaptor
    The Liquid Light Guide Adaptor (LLG-A) makes it possible to couple any Prizmatix Microscope LED into a Liquid Light Guide (LLG).  It can be easily assembled by the user on the LED output.  The LLG adaptor can...
  • Attached to microscope adapter and fiber
    $1,133.00 Prizmatix Beam Switcher
    The Beam Switcher is a convenient accessory which allows for dual use of LED light sources. It can be used in two different ways: It can be installed on a microscope and used to instantly switch between microscope...
  • Prizmatix Filter Wheel
    $904.00 Filter Wheel Module for Microscope and Fiber Coupled LEDs
    The Filter Wheel Accessory holds up to six filters, and is used to narrow the spectral emission of Prizmatix Ultra High Power (UHP) LED light sources. It is especially useful for Prizmatix UHP-T White LEDs, and can...
  • Prizmatix Fiber Coupling Adaptor
    $297.00 Choose Options Prizmatix Fiber Coupling Adaptor
    The Fiber Coupler Adapter (FCA) makes any of the Prizmatix collimated LEDs into a fiber coupled light source. Used in reverse at the distal end of a fiber the FCA acts as a collimator with a 1” beam. The...
  • UHPTLCC LED Current Controller
    $1,202.00 Prizmatix Benchtop UHP-T Current-Controller
    NOTE: This product is a legacy product. Consider the newer UHPTLCC-02 The Prizmatix UHPTLCC Current Controller is used to power Prizmatix UHP-T LEDs. This Product is included in the UHP-T and UHP-T-EP...